Autonics Encoder E40H6-3-T-24/-3-N-24-1024P

(0 reviews)

Top Selling Products

Atlas Copco Separator - 2901196300

৳0.00
SICK HES/HEM Series (Explosion-Proof)

৳0.00
BAUMER HOG 10 (Ø10mm, Miniature)

৳0.00
BAUMER HOG 11 (Ø11mm, High-Res)

৳0.00
BAUMER HMG 10 (Stainless Steel)

৳0.00
BAUMER HMG 11 (High-Temp)

৳0.00

Reviews & Ratings

0.00 out of 5.0

(0 reviews)

Rate this Product

There have been no reviews for this product yet.

Description

Precautions when using

1. Installation
① This product is composed of precision components, so please use carefully.
When installing this product, if the eccentricity or deviation Angle is too large, it will shorten its service life.
2. Environment
Do not use it in the following environments. Otherwise, faults may occur
① Strong impact or vibration.
② There are corrosive or flammable gases inside.
③ Where the magnetic field is relatively strong or the interference is relatively large.
④ Where the temperature is relatively high or the air temperature is relatively large.
Near acidic or alkaline substances.
⑥) Places in direct sunlight.
3. Vibration or impact
① If it is hit strongly, it may send out wrong pulse signals. ② Therefore, in order to prevent impact when the encoder rotates,
please fix it in advance. Encoders with higher pulses per revolution are susceptible to outside influences,
4. Connect the cable ① Do not pull the cable with a force exceeding 30N after the product is fixed. ② When there is a high voltage
cable or power cable nearby, please use a conduit to cover the cable to prevent failure. ③ When extending the cable may be
interfered with, try to use it in a short distance. ① Shielding cables should be grounded

Download